View SA594N_203618.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
NE594/SA594 Vacuum fluorescent display driver
Product data Supersedes data of 1994 Aug 31 File under Integrated Circuits, IC11 Handbook 2001 Aug 03
Philips Semiconductors
Philips Semiconductors
Product specification
Vacuum fluorescent display driver
NE594/SA594
DESCRIPTION
The NE594/SA594 is a display driver interface for vacuum fluorescent displays. The device is comprised of 8 drivers and a bias network, and is capable of driving the digits and/or segments of most vacuum fluorescent displays. The inputs are designed to be compatible with TTL, DTL, NMOS, PMOS or CMOS output circuitry. There is an active pull-down circuit on each output so that display ghosting is minimized and no external components are required for most fluorescent display applications.
PIN CONFIGURATIONS
N Package
IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8 1 2 3 4 5 6 7 8 9 TOP VIEW 18 17 16 15 14 13 12 11 10 OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8 V+
FEATURES
GND
* Digit and/or segment drivers * Active output pull-down circuitry * High output breakdown voltage * Low supply voltage * Input compatible with all logic outputs
APPLICATIONS
D1 Package
IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8 GND 1 2 3 4 5 6 7 8 9 20 19 18 17 16 15 14 13 12 11 OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8 V+ NC
* Digital clocks * Dashboard displays * Panel displays
NC 10
TOP VIEW NOTE: 1. SOL - Released in large SO package only.
SL00485
Figure 1. Pin Configurations
ORDERING INFORMATION
DESCRIPTION 18-Pin Plastic DIP 20-Pin Plastic SO 18-Pin Plastic DIP 20-Pin Plastic SO TEMPERATURE RANGE 0 C to +70 C 0 C to +70 C -40 C to +85 C -40 C to +85 C ORDER CODE NE594N NE594D SA594N SA594D DWG # SOT102-4 SOT163-1 SOT102-4 SOT163-1
2001 Aug 03
2
853-1045 26836
Philips Semiconductors
Product specification
Vacuum fluorescent display driver
NE594/SA594
EQUIVALENT SCHEMATIC
X8
R4 20 k Q3 R5 4.5 k Q4 R9 150 k VCC
OUT
D1
R1 IN 20 k
R6 20 k
Q7
Q2 Q1 R2 20 k
R3 D2 7.5 k Q5
R7 10 k
R8 10 k Q6 GND
SL00486
Figure 2. Equivalent Schematic
ABSOLUTE MAXIMUM RATINGS (at 25 C, unless otherwise noted)
SYMBOL VCC VOUT VIN IOUT Supply voltage Output voltage Input voltage Output current Each output All outputs Maximum power dissipation, Tamb = 25 C (still-air)1 N package D package Operating ambient temperature range NE594 SA594 Storage temperature range Maximum junction temperature Lead soldering temperature (10 sec max) PARAMETER RATING 45 VCC -0.3, +20 50 200 1690 1390 0 to +70 -40 to +85 +65 to +150 -150 230 V mA mA mW mW C C C C C UNIT V
PD
Tamb Tstg Tj Tsld
NOTE: 1. Derate above 25 C, at the following rates: N package at 13.5 mW/C D package at 11.1 mW/C
2001 Aug 03
3
Philips Semiconductors
Product specification
Vacuum fluorescent display driver
NE594/SA594
DC ELECTRICAL CHARACTERISTICS
VCC=+4.75 V to +40 V; Tamb = 0 C to +70 C (NE), Tamb = -40 C to +85 C (SA), unless otherwise stated. LIMITS SYMBOL VCC ICCH ICCL VIN VIH VIL IIH IIL IIN PARAMETER Supply voltage range Supply current (all outputs HIGH) Supply current (all outputs LOW) Input voltage range Input voltage to ensure logic `1' Input voltage to ensure logic `0' Input current to ensure logic `1' Input current to ensure logic `0' Input current VIN = 2.6 V VIN = 5.0 V VIN = 15.0 V VOH g g Output high voltage VIN = 3.5 V; IOUT = -25 mA VOUT with respect to VCC VOH VOFF IOH IOUT ICEX Output high, no load voltage Output `OFF' voltage level Available output current Output pull-down current Output leakage current Tamb = 25 C Over temp. VCC -1.5 VCC -2 VCC -1 60 180 0.68 VCC -1.1 VCC -1.3 VCC -0.8 10 -35 100 200 -1 -1 400 200 100 10 130 330 1.3 VCC = 40 V; VIN = 3.5 V VCC = 40 V; VIN = 0.4 V 0 2.6 0.8 TEST CONDITIONS Min 4.75 Typ 35 3 0.4 Max 40 6 1 15 UNIT V mA mA V V V A A A A mA V V V mV mA A A
VIN = 3.5 V; IOUT = 0; Tamb = 25 C; VOUT with respect to VCC VIN = 0.8 V; IOUT = 0 VCC = 35 V; VIN = 3.5 V; VOUT = 30 V; Tamb = 25 C VCC = VOUT = 35 V; inputs open Tamb = 25 C; VIN = 0.4 V VCC = 40 V; VOUT = 0 V
AC ELECTRICAL CHARACTERISTICS
VCC = 35 V; Tamb = 25 C. SYMBOL tPLH tPHL tR tF PARAMETER Propagation delay low-to-high output transition Propagation delay high-to-low output transition Output rise time Output fall time TEST CONDITIONS 50% VIN to 50% VOUT 50% VIN to 50% VOUT 10% VOUT to 90% VOUT 90% VOUT to 10% VOUT LIMITS Min Typ 1 3 0.5 1.5 Max 5 10 3 5 UNIT s s s s
2001 Aug 03
4
Philips Semiconductors
Product specification
Vacuum fluorescent display driver
NE594/SA594
SWITCHING TIMES OF DRIVERS
PRR 5V VIN 0V tPDLH 34 V
90% 10%
tPDLH VOUT
50% 50%
10%
0V tR tF
90%
SL00487
Figure 3. Switching Times of Drivers
VCC = 35 V
VIN PRR = 10 kHz tR = tF = (50 ns) RL CL
VOUT
RL = 10 k CL = 50 pF
SL00488
Figure 4. Test Circuit
2001 Aug 03
5
Philips Semiconductors
Product specification
Vacuum fluorescent display driver
NE594/SA594
TYPICAL PERFORMANCE CHARACTERISTICS
IIN vs VIN
1000 5
ICCH vs Temperature
800
4 VCC = 40V
600 IIN (A) 400 ICCH (mA)
3
2
200
1
0 0 5 10 VIN (V) 15 20
0 -40 0 25 50
oC
85
TEMPERATURE
Output Voltage vs Output Current
VCC 5
ICC vs VCC (All inputs High)
VCC -1 TA = VCC -2 VOUT (V) VCC -3 ICCH (mA)
4
25oC
3
2 TA =
25oC
VCC -4
1
VCC -5
0
0
10
20
30
40
50
0
10
20
30 VCC (V)
40
50
IOUT (mA)
SL00489
Figure 5. Typical Performance Characteristics
2001 Aug 03
6
Philips Semiconductors
Product specification
Vacuum fluorescent display driver
NE594/SA594
2 78mG + 1N4002 40V RMS 0.47F R7 5.6K 1N914 4 R8 50K R9 15K DIMMER ADJUST
+ V + 16 TO + 40V
1 78 HV12 3 .1F
2
T1
10 MIN SET HOUR N.O. SET ALARM SET N.O.
N.O. 22 11 12 18 19 13 14 17 25 3 4 2 26 8 7 1 ALARM OFF
ALARM ENABLE N.C. SNOOZE Q1 2N222 N.O.
+12V
R1 100K 3 2 8 1/2 LM393 1
+12V R2 10K
15 23 24 9 27 5 6 28
MK 50250
R6 100
8
+12V R3 10K 1/2 LM393 4 9 8 76 543 2 7
6 5
R4 100K
R5 1 MEG
987 +12V +V
6543
2
NE/SA594 +V 5.6 1W F A A A/P A C D 10 10 S I M M D S O S HR HR H L S S I E L E D D I9 IN 752 EEG GGI T GSGI G E I G T IE GL ID T 10 11 12 13 14 15 16 17 18
NE/SA594 10 11 12 13 14 15 16 17 18
ITRON JJA CLOCK DISPLAY
Z, 5.6V
C 10 1 C E G F B O MIN MIN S S S S S LDD EEEEE OI NG DI IT G I T I G I T GGGGG
F I L
T2 5.6 1W
SL00490
Figure 6. Typical Application: Digital Clock With Alarm
2001 Aug 03
7
Philips Semiconductors
Product specification
Vacuum fluorescent display driver
NE594/SA594
DIP18: plastic dual in-line package; 18 leads (300 mil); long body
SOT102-4
2001 Aug 03
8
Philips Semiconductors
Product specification
Vacuum fluorescent display driver
NE594/SA594
SO20: plastic small outline package; 20 leads; body width 7.5 mm
SOT163-1
2001 Aug 03
9
Philips Semiconductors
Product specification
Vacuum fluorescent display driver
NE594/SA594
Data sheet status
Data sheet status [1] Objective data Preliminary data Product status [2] Development Qualification Definitions This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A.
Product data
Production
[1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
Contact information
For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825
(c) Koninklijke Philips Electronics N.V. 2001 All rights reserved. Printed in U.S.A. Date of release: 12-01
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
Document order number:
9397 750 09234
Philips Semiconductors
2001 Aug 03 10

▲Up To Search▲

Price & Availability of SA594N

	To Download SA594N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .